Solutions / Products
Products & Solutions
Onsite PFAS removal and destruction, used alone or together.
Each system runs onsite, so PFAS is treated where it is found. Start with the product that matches your goal, or use them together as one closed loop.
Integrated Onsite Solutions
Olift concentrates PFAS and Obreak destroys it in one closed loop, so the liability stays onsite.
Olift® foam fractionation
Removes and concentrates PFAS from water onsite using ozone foam fractionation.
Obreak® electro-oxidation
Destroys concentrated PFAS onsite using electricity, with no media to change out.
How they work together
Remove, concentrate, destroy: one closed loop
Olift® pulls PFAS out of water and concentrates it into a small foamate. Obreak® destroys that concentrate with electro-oxidation. Run together, PFAS is removed and destroyed at the site where it is found.
01
Remove with Olift®
Ozone foam fractionation strips PFAS from the water stream and leaves a treated effluent behind.
02
Concentrate the foamate
PFAS ends up in a small foamate volume. At WMEL the foamate was over 4x smaller, and at PVSC it was 1% and 0.4% of the feed flow.
03
Destroy with Obreak®
Electro-oxidation breaks down the PFAS in the concentrate, with more than 80% destruction for under 1 kWh per gallon at WMEL.
Real results
Proven in the field
>99.5%
regulated PFAS removed by Olift® at Hobart Airport
96%
PFAS destroyed by Obreak® in the tertiary stage at PVSC
>90%
removal of all six regulated PFAS at WMEL, 10 MGD
Not sure which fits your site?
Tell us about your water and we will point you to the right system.