Products / Integrated Solutions

Integrated PFAS removal and destruction

One treatment train, from concentration to destruction, at your site.

Short answer

The integrated onsite solution combines Olift® foam fractionation concentration, Obreak® electro-oxidation destruction and a media polishing step in one treatment train. At the Passaic Valley Sewerage Commission, it removed 93% of total PFAS from landfill leachate, with Obreak® electro-oxidation destroying 94 to 96% of what was concentrated. In Alabama, integrated Olift® foam fractionation and Obreak® electro-oxidation removed more than 90% of all six regulated PFAS from 10 MGD of reverse osmosis concentrate.

Break free from PFAS™

Separating PFAS is not the same as getting rid of it.

Reverse osmosis and adsorption media pull PFAS out of the water, but the PFAS is only moved, which leaves the possibility of it being re-released into the environment.

Utilities and industries have to weigh cradle-to-grave cost and liability. Destroying PFAS onsite gives operators the greatest confidence and a lower legal liability.

Process flow

One treatment train, from PFAS-impacted water to clean water

The treatment train

Concentrate, destroy, polish

Obreak® Electro-Oxidation, the E2METRIX® EO system, sits at the heart of a complete, cost-effective treatment train for water and effluents.

Concentrate upstream

01

Concentrate upstream

Olift® foam fractionation concentrates the PFAS in the feed by 100x to 10,000x, so the destruction step sees a small, strong stream and needs far less capital and energy.

Destroy with Obreak®

02

Destroy with Obreak® electro-oxidation

Direct and indirect oxidation reactions in the EO reactors break the concentrated PFAS down onsite. Full destruction is feasible, but a sensible target is 90% to 99%.

Polish downstream

03

Polish downstream

A media filter polishing step finishes the job, completing the treatment at a cost stakeholders can accept.

Why the order matters

Concentrating first changes the economics

100x-10,000x

PFAS concentration in the feed before it reaches Obreak® electro-oxidation

90-99%

target destruction, with media polishing to finish

20% / 25%

lower CAPEX and OPEX at PVSC with a tertiary stage vs. secondary only

Applications

Built for municipal, industrial and landfill sites

Municipal

Municipal

Drinking water, wastewater and reverse osmosis concentrate.

Learn more

Industrial

Industrial

Process water and effluent from industrial operations.

Learn more

Landfill leachate

Landfill leachate

Leachate and foamate treated where it is generated.

Learn more

JD Sims-RM Hames Reverse Osmosis Water Treatment Facility, Hillsboro, Alabama
Drinking water plant · Alabama, USA

JD Sims-RM Hames Water Treatment Facility

>90%

removal of all six regulated PFAS from 10 MGD of reverse osmosis concentrate

Integrated Olift® foam fractionation and Obreak® electro-oxidation · West Morgan-East Lawrence Water and Sewer Authority

Tell us about your site

Send us your flow and PFAS concentrations. An E2METRIX engineer will reply within 24 hours.