Products / Obreak® electro-oxidation

Obreak® electro-oxidation

Onsite PFAS destruction with electro-oxidation

Short answer

Obreak® electro-oxidation is the E2METRIX® electro-oxidation system for onsite PFAS destruction. It breaks PFAS down to carbon dioxide and fluoride ions at the site where the water is, so nothing has to be shipped offsite. In the pilot at the Passaic Valley Sewerage Commission, Obreak® electro-oxidation destroyed 94 to 96% of the concentrated PFAS using under 0.016 kWh per gallon.

Obreak® electro-oxidation (EO) system by E2METRIX, an Ovivo company, incorporates over a decade of expertise in developing, designing, fabricating, and delivering commercial EO solutions for diverse applications and contaminants.

Row of purple Obreak reactor columns

The features of our commercial EO reactors—industrial-grade robust design, optimized hydraulics based on CFD modeling, ease of maintenance, automation, energy efficiency, and remote operation across multiple platforms—have been integrated into Obreak® electro-oxidation (EO) system for onsite PFAS destruction.

In the EO process, a continuous electrical current is passed through non-sacrificial electrodes submerged in process water within an Obreak® electro-oxidation reactor. This EO process involves direct oxidation via electron transfer at the anode surface and indirect oxidation via the generation of oxidants within the water, leading to the stepwise breakdown of the carbon-fluorine (C-F) bonds, which PFAS are characterized by, into their mineral forms of carbon dioxide (CO₂) and fluoride ions (F-). Both destruction products are harmless at low concentrations. When Obreak® electro-oxidation is combined with concentration and polishing steps into an integrated treatment approach, it can significantly reduce liabilities and long-term disposal costs compared to current adsorption-only methods. Furthermore, The Obreak® electro-oxidation can be conveniently and safely operated at the site where the PFAS-contaminated liquid is located, thereby eliminating transportation and liability concerns

ovivo-pfas-diagram-electrochemical-oxidation-eo-800px85

Stepwise
degradation

ovivo-pfas-stepwide-degratation-600px

Obreak® electro-oxidation can achieve high-destruction efficiencies in a wide variety of water treatment applications.

Drinking water treatment plant

Drinking water
plant

Landfill leachate treatment site

Landfill leachate
treatment
(onsite or offsite)

Municipal wastewater treatment plant

Municipal wastewater
plant

Groundwater remediation site

Groundwater
remediation

Water reuse plant

Water reuse
plant

Industrial wastewater treatment for surface finishing and semiconductors

Industrial wastewater
(ex. Surface finishing, semiconductors,
PFAS manufacturing)

Obreak® electro-oxidation for onsite PFAS destruction can be configured (e.g. anode selection) and adapted to meet your technical, regulatory, and financial needs. More importantly, Obreak® electro-oxidation is one tool in the E2METRIX toolbox of concentration, destruction, and polishing unit operations. Ovivo can provide a single processing step or the complete, overall, integrated PFAS treatment train — your best bet for a cost-effective solution.


The E2METRIX toolbox

Concentrate, destroy, polish

Concentrate upstream

01

Concentrate upstream

Olift® foam fractionation concentrates the PFAS in the feed by 100x to 10,000x, so the destruction step sees a small, strong stream and needs far less capital and energy.

Destroy with Obreak®

02

Destroy with Obreak® electro-oxidation

Direct and indirect oxidation reactions in the EO reactors break the concentrated PFAS down onsite. Full destruction is feasible, but a sensible target is 90% to 99%.

Polish downstream

03

Polish downstream

A media filter polishing step finishes the job, completing the treatment at a cost stakeholders can accept.

Obreak® electro-oxidation has been shown to be highly effective in destroying PFAS
on concentrated streams, such as:

  • Foamate from foam fractionation
ovivo-pfas-diagram-removal-concentration-Olift-300px
  • Concentrate from ion-exchange resin regeneration
ovivo-pfas-diagram-concentrate-ion-exchange-resin-400px
  • Concentrate from reverse osmosis (RO)
ovivo-pfas-diagram-concentrate-reverse-osmosis-400px
obreak-table

The E2METRIX Obreak® Electro-Oxidation system
is available NOW!

 

The Obreak® electro-oxidation (EO) system can be delivered in a container or trailer or be a fixed installation inside a building.

obreak-container
Passaic Valley Sewerage Commission wastewater treatment plant, Newark, NJ
Wastewater treatment plant · Newark, New Jersey

Passaic Valley Sewerage Commission

93%

of total PFAS removed from landfill leachate, with Obreak® electro-oxidation destroying 94% to 96% of what was concentrated

Integrated removal, concentration and destruction · 500,000 gpd proposed capacity

FAQ

Obreak® electro-oxidation questions

What is Obreak® electro-oxidation?

Obreak® electro-oxidation is the E2METRIX electro-oxidation system for onsite PFAS destruction. It builds on more than a decade of experience developing, designing, fabricating and delivering commercial electro-oxidation systems.

How does electro-oxidation destroy PFAS?

A continuous electrical current passes through non-sacrificial electrodes in the reactor. PFAS break down step by step through direct oxidation at the anode surface and through oxidants generated in the water.

Does Obreak® electro-oxidation destroy PFAS or only move it?

It destroys it. In the pilot at the Passaic Valley Sewerage Commission, Obreak® electro-oxidation destroyed 94 to 96% of the PFAS that had been concentrated, at under 0.016 kWh per gallon. Read the case studies.

What water does Obreak® electro-oxidation treat?

Obreak® electro-oxidation is used on concentrate from Olift® foam fractionation in drinking water plants, landfill leachate, municipal wastewater, groundwater remediation, water reuse and industrial wastewater.